Title
Order: Be it hereby ordained that the Revised Ordinances of 2020 Section 12.24 be updated as per attachment:
Body
Add Section 4.16.080 (I): THIS IS AN ENTIRELY NEW SECTION.
I Accessory Signs
1. Accessory signs shall be limited in size to 50% of the size of the allowable wall sign for that District. A maximum of 3 accessory signs per tenant may be allowed. Accessory signs may be located facing a street frontage or parking lot.
Amend Section 4.16.090 (A) by adding: THIS IS AN ENTIRELY NEW SECTION
5. Nonconforming uses in Residential Districts
The following signs may be also be permitted for nonconforming uses in Residence A, Residence B, and Residence C zoning districts that meets the standards provided in MCC 12.28.010 as amended, subject to any applicable review and approval by the Sign Design Review Committee and any other conditions of this Code:
a. Wall, Awning, and Projecting Signs
The total area of all wall, awning, and projecting signs shall be limited to one (1) sq. ft. per one (1) linear foot of building frontage that faces a street frontage, subject to any limitations based on sign type as regulated in Section 4.16.080.
1. For non-residential uses or building identification, one wall sign per tenant may be permitted, provided no single sign shall exceed 24 sq. ft. in area per sign face.
2. For non-residential uses or building identification, awning signs may be permitted.
3. For non-residential uses or building identification, one (1) projecting sign per ground floor establishment and one (1) projecting sign per building entrance serving one or more commercial tenants without a ground floor entrance may be permitted, provided each sign shall not exceed six (6) sq. ft. in area per sign face.
4. Illumination shall be prohibited.
b. Window signs as regulated in Section 3.35.8.3
Amend Section 4.16.090 (C)(2)(a) by adding: THE TEXT IN BOL...
Click here for full text